WORK COVERALL
- It consists of two pieces to form the front at the top. The cut of the forwards in its inferior part is straight.
- In the front it has a vertical closure of double cursor hidden by a central fin, which measures at least 4 cm wide and has an adhesive closure (velcro) on the upper part, additionally we place velcro in the central part of the 3cm coverall wide by 4.5 cm long stitched and topped.
- In both front at chest height (Sisa), has patched pockets centered vertically on each side, with a wallet-type lid, with double stitching, which is closed by Velcro adhesive closure, These pockets have a reinforcement of the same fabric in its lower part.
- In the left pocket it has a 2.5 cm spherical opening, which has a seam on the upper part only.
- At the height of the hip, it has two patched pockets (one on each side) with a hidden leaned opening stitched with a double needle, the lower end of which is cut straight stitched on the upper part with the waistband and on its side with the sides, with clips at the bottom.
- On each side at the height of the hip carries a hidden opening handrail of 15 cm.
- The back consists of one piece.
- With a silver gray reflective band on the back at the top of armhole to armhole 1" wide.
- It has bellows to improve the overall size of the coverall.
- Overlock seams and security stitches are used inside the coverall.
- Closing seams are used, external pestpunte effect in the critical seams of coverall.
- The waistband, along the entire back is sewn inside (only from the back side to side) a hidden elastic band, this allows the coverall adjustment to the body.
- Of a minimum width of 4.5 cm in the entire circumference of the waist.
- The sleeves are in one piece so that it adapts to the shape of the arm, the cut is rounded to match the armhole and in the lower straight to match the cuff.
- Adjustment cuff with two adjustable buttons.
- With 1" reflective tape sewn at a point equidistant between the shoulder and the elbow, silver.
- Sport type neck without neck foot.
- 100% sewing thread is used in flame retardant fibers (ARAMIDAS) and durability capable of resisting high temperatures on contact with fire, heat and electric arc with high resistance to washing cycles.
- It has 22 to 23 centimeters (cm), which allows the use of safety boots.
- In each of the coats, a reflective ribbon 1" wide is placed at 15 cm below the knee.
